BIO Mass Burners - Vitolig 200

Wood gasification boiler, 13 to 40 kW

Vitolig 200 is a high quality wood gasification boiler (13 to 40 kW) with output modulating between of 50 to 100% of rated output. 50 cm long split logs, chippings and wood briquettes are easily handled by the large stainless steel hopper. Combustion periods of up to 12 hours guarantee long intervals between recharging.

The unique automatic heat-up control ensures that the combustion chamber temperature required for optimum combustion is reached within three minutes from start-up.

The extraction of oxygen from inside the hopper means that the split logs smoulder rather than burn. There is no flame, as the oxygen required for combustion has been removed. The variable speed vacuum fan ensures that the correct amount of wood gases are drawn from the incandescence into the ceramic combustion chamber. Here, it is enriched with oxygen through the rotary ventilation disc. The combustible wood gases burn cleanly at high temperatures, even at partial load.

The demand-dependent production of combustible wood gas means that the boiler output can be regulated from 50 to 100%. Combustion efficiency reaches 92% and emissions are low.

Digital boiler control unit

Combustion is regulated by the easy to use digital boiler control unit, with self-diagnostic system. A differential temperature buffer cylinder loading controller is part of the control system.


Benefits at a glance:

• High quality wood gasification boiler, 13 to 40 kW: 50 cm long split logs, chippings and wood briquettes are easily managed by the stainless steel hopper and the combustion chamber made from special ceramics.

• Automatic heat-up procedure for heat availability in minutes.

• Modulating operation in every output range from the powerful variable speed vacuum fan, therefore optimum matching to the current heat demand.

• Process optimised combustion and automatic output control: combustion efficiency up to 92%, as well as low emissions.

• No odour nuisance in the boiler room because of our patented carbonisation gas extract system.

• Easy to operate digital boiler control unit with self-diagnostic system.

• Large stainless steel hopper for long combustion periods of up to 12 hours without recharging.

• Simple, mechanical cleaning of the heating surfaces and long cleaning intervals, e.g. ash needs to be removed only every other week.