GEO Thermal - Vitocal 300
 Brine/water
heat pump rated from 39.6 to 81.2 kW, water/water heat
pump rated from 52.0 to 106.8 kW, flow temperatures up
to 55 °C
The two-stage version of the
Vitocal 300 heat pump achieves a heat output of up to
106.8 kW – perfect for buildings with high heating
requirements. Groundwater or the ground can be selected
as heat sources.
Partial load or full output
Two independent compressor circuits
permit an especially high level of efficiency. At lower
heating requirements the Vitocal 300 switches
automatically over to energysaving partial-load
operation.
CD 60 digital control unit
The weather-compensated CD 60 digital
control unit can control not only a second heat source
but also one or two more heat pumps. This means that
complete heating control centres are possible without
additional outlay, such as for larger-sized commercial
buildings, for example.
Complete or partial supply
The two-stage Vitocal 300 is suitable
for all operating modes. It can supply all your heating
and hot water requirements or be supported by a second
heat source if more heat is required, for example, on a
time to time basis or as part of modernization.
The powerful heart of Vitocal 300
The Compliant scroll compressors are
powerful and quiet-running. This quietness is due to
full hermetic encapsulation and vibration damping. High
operational safety and reliability are also assured.
Benefits at a glance
- Two-stage version with output
up to 106.8 kW
- For monovalent heating
operation for all heating and hot water requirements
- Can also be operated in
combination with a second heat source or with
additional heat pumps (cascade)
- High operating safety,
reliability and quiet operation thanks to the scroll
compressor
- Two-stage version makes
partial-load operation possible
- Comfortable, menu-guided CD 60
control unit
- Output:BW 39.6 to 81.2 kW, WW
52.0 to 106.8 kW
For
more information click here to download brochure
|
